Automatic Diesel Genset Control Panel For Synchronization Two 1250KVA Gensets

Automatic Diesel Genset Control Panel For Synchronization Of Two 1250KVA Gensets

Descriptions Of Control Panel Smartgen HGM9510

HGM9510 controller also monitors the engine, indicating the operational status and fault conditions accurately. When abnormal condition occurs, it splits bus and shuts down the genset, simultaneously the exact failure mode information is indicated by the LCD display on the front panel. SAE J1939 interface enables the controller to communicate with various ECU (ENGINE CONTROL UNIT) which fitted with J1939 interface.

Specifications:

1. Multiple running modes in auto state: with load running, off load running, demand parallel running;

2. Ramp on and ramp off function;

3. 3 fixed sensors (temperature, oil pressure and liquid level);

4. 2 configurable sensors can be set as sensor of temperature, oil pressure or fuel level;

5. More kinds of curves of temperature, oil pressure, fuel level can be used directly and users can define the sensor curves by themselves；

6. Precision measure and display parameters about Engine,

7. Protection: automatic start/stop of the gen-set, ATS(Auto Transfer Switch) control with perfect fault indication and protection function;

8. All output ports are relay output;

9. Parameter setting: parameters can be modified and stored in internal EEPROM memory and cannot be lost even in case of power outage; most of them can be adjusted using front panel of the controller and all of them can be modified using PC via USB or RS485 ports;

10. Multiple crank disconnect conditions (speed sensor, oil pressure, generator frequency) are optional.

Finished synchronous control system for two units of generator sets

diesel generator control panel

electric generator parts

Automatic Diesel Genset Control Panel For Synchronization Two 1250KVA Gensets Images